"A" Exhaust for Bullrider cars.

"A" Exhaust for Bullrider cars

"A" Exhaust for Fiser.

"A" exhaust for Fiser cars

"B" Exhaust for Bullrider cars.

"B" exhaust for Bullrider cars

"B" Exhaust for Fiser.

"B" exhaust for Fiser cars

"Big Boy" Steering Wheel.

"Big Boy" Flat Bottom Steering Wheel W/ Foam Grip

#40 Chain Half Link.

Details 

#40 Chain Half Link

#40 Chain Master Link.

Details 

#40 Chain Master Link

#40 Roller Chain Lotus.

Details 

#40 Chain 10'/box

#40 Roller Chain Tsubaki.

Details 

#40 Roller Chain 10'/box

1 1/4 Rear Axle Fiber Shim.

Details 

1 1/4" ID Fiber shims

1 1/4 Rear axle Spacer kit.

Details 

1-1/4" 8pc Rear Axle Spacer Kit.

1pc Race suit - Crow.

Details 

JUNIOR DRIVING SUITS: 1-PIECE SUIT Single Layer Proban® 1-Piece Suit Features Straight Leg with Inside Cuff, Inset Pockets, High Rise Collar and European Styling, SFI 1 Approved

3/4 Round Steering Wheel Pad.

3/4 Round Steering Wheel Pad

3/8 Heim End.

Details 

3/8 Thread with 5/16 Hole "Right Hand"

3/8 Heim End.

Details 

3/8 Thread with 5/16 Hole "Left Hand"

4-Way Valve core tool.

4-Way Valve core tool

5/16 Heim End.

5/16 X 5/16 Left hand thread heim end

5/16 Heim End.

5/16 X 5/16 Right hand thread heim end

5/16 Left Hand Heim End 6 pack.

Details 

5/16 X 5/16 left hand thread heim end (6 PACK)

5/16 Right hand Heim End 6 pack.

Details 

5/16 X 5/16 Right hand heim end (6 PACK)

5/8 Front Spindle Spacer kit 7pcs.

Details 

5/8" Front spindle kit.

Advanced Racing Shock.

Details 

This shock provides many engineering advantages. The unique bleed plate check valve creates a precise low-speed dampening to properly control weight transfer and corner transitional speeds.

Advanced Racing Shock Wrench.

Spanner wrench for closure nut

Air Filter "Tapered Shaped".

Details 

Honda Cone Shaped Air Filter 4" long with cone/tapered design 2 7/16 ID

Air Filter 3-1/2" x 4" Angled 20 degree - 2-7/16" Flange.

Details 

Fabric/Steel Mesh Construction 3 1/2 x 4 x 2 7/16 Angled 20 degrees

Air Filter 3-1/2" x 4" Straight Design - 2-7/16" Flange.

Details 

Fabric/Steel Mesh Construction 3 1/2x 4 x 2 7/16 ID Straight Design

Air Filter Economy Foam Filter.

Details 

Economy air filter " The Foamie" 5 x 3 1/4 x 2 7/16 ID

Allen cap screw.

1/4" - 28 x 1 1/4 " long allen head cap screw. Used for rear hubs

Allen cap screw.

1/4"-28 x 2" long allen head cap screw.Used for siamese double brg. hub

Allen cap screw.

5/16" - 18 X 1 1/4" long allen head cap screw . Used for rear hub studs

Allen cap screw.

5/16"-18 X 1" long allen head cap screw . Used for rear hub pinch bolt

Allen cap screw.

Stainless Steel allen head cap screw W/nylok insert. Used for 1 1/4"& 1 3/8" aluminum hub brake slider assemblies.

Allen set screw.

1/4"-20 X 3/8" long allen set screw. Used for 1 1/4" & 1 3/8" trick collars

Aluminum Engine Gear.

Details 

Aluminum engine gears for Smoker quick change hub."Skip tooth"

Aluminum Engine Gear.

Details 

Aluminum Engine gears for Smoker quick change hub

Aluminum Engine Gear.

Details 

Smoker aluminum engine gear for quick change hub

Aluminum Engine Gear.

Details 

Smoker aluminum engine gear for quick change hub. "Skip tooth"

AN "Deco Kit".

Details 

Deco AN fuel line installation kit

AN "Honda" Kit.

Details 

AN fitting "Honda" fuel line installation kit

AN 90 Degree Fitting.

Details 

1/8 pipe to, 90 degree AN #4 Flare

AN Push Fitting.

Details 

#4 AN Straight Push Fitting

AN reducer.

Details 

1/4" male to 1/8” female reducer

AN Straight Fitting.

Details 

1/8" pipe to AN #4 flare straight

Arm Restraints - Crow.

ARS 5/16" Bushing.

5/16" tapered bushing

ARS Adjusting Nut.

Adjusting nut with pinch clamp & locking bolt

ARS Pre-load Shim.

.003 (10 per pack)

ARS Pre-load Shim.

.005 ( 10 per pack)

ARS Pre-load Shim.

.001 (10 per pack)

ARS Pre-load Shim.

.002 (10 per pack)

ARS Rebuild Kit.

This kit includes the following :(1) std.screw on eye w/bearing,(4) O-Rings for screw on eye,(2) shafts,(2) bleed screws for closure nut,(2) seals for closure nut,(1) wiper for closure nut,(2) bushings for closure nut,(2)O-Rings for closure nut, and (1)spanner wrench for closure nut.

ARS Revalve Kit.

This kit includes the following:Pistons-(2)with .010/.003 offset,(1)with .020/.003 offset,(4) "A" shims & (4)"B" shims,(4) bleed plates,(2) springs for bleed plates,(10) pre-load shims of these sizes .001,.002,.003,.005.

ARS Shock Bleed Plate.

No holes

ARS Shock Bleed Plate Spring.

ARS Shock Bleed Screw.

Bleed screw for closure nut

ARS Shock Bushing.

Bushing for closure nut

ARS Shock Eye.

Short eye w/bearing

ARS Shock Eye.

Extended eye w/bearing

ARS Shock Eye.

Standard eye w/bearing

ARS Shock Oil.

Gallon